Sunlight Readable LED Screens for ATM |
Tired of
constantly replacing the CCFL backlight lamp again, again, and again when the situation has no time for downtime? Now it is time to upgrade to
the LED backlight. Extending its life and improving its performance, upgrading
to the UB Series LED backlight kit seems to be the only option.
Our LED Drivers can easily be configured to sunlight readable models ( UB**) or configured to power-saving mode (Low).
|
|
MS104R43X1ATM1000+184 - 1000 nits
This 10.4” Sunlight readable LED screen is direct replacement for
Hantle/Tranax C4000 and Hyosung NH5000CE that original equipped with 10.4”
screen. It comes with a wire adapter that can be directly plug-in to they are existing inverter wire harness.
The custom wire adapter also compatible with the following inverters: AT0104, GH025A, DS1002WJM, CXA-0319 and CXA-2081. It is easy to install, no technical skill require, no soldering require, anyone can do it!
Price: $281.99
|
|
|
|
CLAA080MB0DCW-UB35 - 500 nits
This 8” Chunghwa CLAA080MB0DCW is most commonly used in ATM. Although it has LED backlight, unfortunately,
to archive sunlight readable, upgraded to UB35 series seems to be an only option.
It is easy to install, no technical skill require, anyone can do it!
More details
Price: $219.99
|
|
|
|
How to connect LED Driver (MS456UB) to the existing inverter wire harness |
The easiest way would be when JP2 is shorted.
Just simply apply VIN (Red wire, typically 12V DC) and GND (Black) to MS456UB.
Note:
MS456UB can also accept 24V DC input. Please let us know at the checkout if you have a 24V
DC supply.
|
|
However, in most of case,
you do need to connect “ENA” to turn LED backlight On/Off because 12V DC is always present at VIN, even when unit has powered off.
6 pin wires are color coded: Red=VIN, Yellow=ENA, White=ADJ and Black-GND |
Need help to identify inverter's pin assignment?
Please click here
|
|
CCFL vs UB LED Backlight Kit - See the Difference!
Please click here for more details
|
|
|
TST01
Testing 4 wires, 5 wires and 8 wires resistive touch screens
LST05-V3
LCD screen tester (for testing eDP/embedded Display Port interface). With its built-in Color bar generator, it can test resolution from 1280X800 to 3840X2160.
IT03
Testing LED Strip without Disassembly. IT03 can test all LED strips from a smaller industrial screen and up to 70 inch TV screen.
Sunlight Readable LCD
Simply swap out your defective LCD screen, you now have a sunlight readable Monitor.
UB Series LED Kit
UB series are the direct replacement for Industrial LCD screens that were originally equipped with 1, 2, 4 and 6 CCFL
backlight lamps.
SB Sereis LED Kit
These super bright LED upgrade kits are designed for LCD screens that original equipped with its manufacturer’s LED strip
Touch Screen Inverter
These are brand new substitute backlight inverter module for Point-of-Sale screen,
ATM and other type of touch screen.
LCD Controller
These LCD Controller kits are designed to be easily integrated into the LCD screens that they are
commonly used in kiosks, POS, avionics, Vending machine, Digital Signage and all other applications.
LCD Screen
Huge selections of industrial LCD screens
Open Frame Display
Direct Drop in Replacement LCD display
Touch Screen
Resistive and capacitive touch screens
LCD Kit
These LCD kits included LCD controller, LED screen, Push button key and screen wire harness.
LVDS Splitter
One LCD controller can driver two LCD screens and both LCD screens will display the same exact contents
|