Skip Navigation Links Blog | My Account
HyperLink
Skip Navigation Links.
Follow us
HyperLink HyperLink HyperLink


HyperLink

Cross Reference table for LST02


How to set up LST02 to test LCD Screen
  • Identify Makes and part number of the LCD Panel
  • Choose a correct wire harness and setting according to Cross Table below*
  • Apply setting to Dip switch and Panel B+
  • Connect LCD panel wire harness between LST02 and LCD Panel
  • Connect LCD screen's back light to LST02
  • Apply Input Signal to VGA
  • Connect 12V DC to LST02 and Turn it on
Note: 12V DC jack MUST be disconnect and re-connect it back to LST02 for new setting to be effective. 12V DC Jack MUST disconnect before switch to test another LCD screen.
Sort By Brand

Cross Reference table is sort by:
LCD Screen Part Number

Jumper setting is based on build-in driver that installed by MoniServ on LST02
LCD ScreenWire Harness#ResolutionB+LST02PriceDetail
VersaView 1200PRefer to LCD screen800X6003.3V 0.0000Detail
VersaView 1500PRefer to LCD screen1024x7683.3V 0.0000Detail

1,2,3 off*: All new LST02 come with pre-load 1366x768_HD drive.
Custom Wire Harness:($40 to $60 each, It depends on type of LCD screen)
We do offer custom made wire harness. Please email us your LCD screen part number to: techsupport@lcdparts.net

DB01 Driver Burner for LST02

$24.99 - shipping is $3 by USPS

Our LCD Screen tester LST02 only comes with a standard resolution. So to test the LCD screens that have non standard resolution, DB01 driver burner is needed. DB01 allows you to load a non standard driver (resolution) into LST02. For example: To test a 17.3?LED screen, you do need to set the resolution to 1600X900. But this resolution cannot accomplish by setting the dip switch. Then DB01 is needed in order to load 1600X900_1LVDS driver into LST02. All drivers are available at Cross Reference Table
HyperLink  
DB_ Register is a program that you need to install in your computer. So it could establish a connection between LST02 and DB1 throughout 9 pin serial cable.
DownLoad

DB01
comes with 9 pin serial data cable and 4 pin to 4 pin wire harness.
How to Use DB01

1024X600-1LVDS6
It is for 8.9" to 10.1" LED screen.
1280X768-1LVDS-8
It is for 4 and 6 Lamps LCD Screen size: 17" WXGA and 17.1" WXGA
1336X768_HD_1LVDS
It is for Laptop screen size: 10.1", 11.6", 15.6" WXGA-HD and 16.0" WXGA-HD
1366X768-2LVDS-8
It is for 18.5" LCD screen
FIX-30S-1LVDS6-1366X768
It is for 18.5", 26" and 32" LCD Screen
1440X900_1LVDS
It is for Laptop screen size: 14.0" WXGA+, WSXGA, 14.1" WXGA+, WSXGA, 17" WXGA+

1400X1050_1LVDS
It is for Laptop screen size: 12.1" SXGA, 14.1" SXGA and 15" SXGA

1600X900_1LVDS
It is for Laptop (LED) Screen size: 14.0" and 17.3" that has 1600X900 Resolution

1600X1200_1LVDS
It is for Laptop screen size: 15" UXGA

1680X1050_1LVDS
It is for Laptop screen size: 15.4" WSXGA

1680X1050-2LVDS-8
It is for LCD screen size up to 22"

1920X1200_1LVDS
It is for Laptop screen size: 15.4" WUXGA

1920x1200_2LVDS-8
It is for LCD TV size: 23 inch


Replacement Parts for LST02
LCD Controller
Replacement LCD Controller for LST02
$69.99
HyperLink
4 CCFL Lamps Inverter
Custom Inverter for LST02
$69.99
HyperLink
HyperLink
Key PCB Assembly
6 Buttons Key PCB Assembly for LST02
$15.99
HyperLink
HyperLink
Front Assembly
Front Control Assembly for LST02
$59.99
HyperLink
HyperLink




TST01
Testing 4 wires, 5 wires and 8 wires resistive touch screens
HyperLink
LST05-V3
LCD screen tester (for testing eDP/embedded Display Port interface). With its built-in Color bar generator, it can test resolution from 1280X800 to 3840X2160.
HyperLink  
IT03
Testing LED Strip without Disassembly. IT03 can test all LED strips from a smaller industrial screen and up to 70 inch TV screen.
HyperLink
Sunlight Readable LCD
Simply swap out your defective LCD screen, you now have a sunlight readable Monitor.
HyperLink

UB Series LED Kit
UB series are the direct replacement for Industrial LCD screens that were originally equipped with 1, 2, 4 and 6 CCFL backlight lamps.
HyperLink  
SB Sereis LED Kit
These super bright LED upgrade kits are designed for LCD screens that original equipped with its manufacturer’s LED strip
HyperLink  
Touch Screen Inverter
These are brand new substitute backlight inverter module for Point-of-Sale screen, ATM and other type of touch screen.
HyperLink  
LCD Controller
These LCD Controller kits are designed to be easily integrated into the LCD screens that they are commonly used in kiosks, POS, avionics, Vending machine, Digital Signage and all other applications.
HyperLink
LCD Screen
Huge selections of industrial LCD screens
 HyperLink

Open Frame Display
Direct Drop in Replacement LCD display
HyperLink
Touch Screen
Resistive and capacitive touch screens
HyperLink
LCD Kit
These LCD kits included LCD controller, LED screen, Push button key and screen wire harness.
HyperLink
LVDS Splitter
One LCD controller can driver two LCD screens and both LCD screens will display the same exact contents
HyperLink
   
Copyright © 1996-2019 MoniServ, Inc. Home  Terms  Privacy  Contact Us   Online Store  Blog