Skip Navigation Links Blog | My Account
Skip Navigation Links.
Follow us
HyperLink HyperLink HyperLink


10.4 inch SKD Kit - Sunlight Readable up to 1600 nits

This SKD kit had upgraded to UB35 series LED backlight. It is so bright that the contents on display visible under strong sunlight. It will Last 10X longer than CCFL lamp. With build-in dip switch on MS456UB LED driver, it can be configured to sunlight readable mode (UB*). Or it can be configured to power saving mode (UL**) and LED backlight will last forever. It is designed to be easily integrated into kiosks (or Replacing your existing defective LCD monitor), POS, avionics, Vending machine, gaming and all other applications.
We also have brightness adjustment kit available at the bottom of the page
Price: $329.99
Part Number: MS104R43LEDX2SKD1600

You do have an option to choose DVI, VGA and HDMI controller at the checkout page(MS489LC). It also has 2.2W Audio amplifier on board, too.
Dip Switch Setting:
We recommend that you try all these setting to see the difference. The thumb of the rules would be lower is better(LED will last longer). To change the setting, please power down the LCD monitor, and then make the change.
* Ultra Bright, this setting may cause shorter life of LED on some LCD screens due to the heat, especially those LCD screens that have the plastic frame instead of Aluminum or metal frame. However, if you prefer to use this setting, we would recommend that you add an additional aluminum heat sink.
** Ultra Low, this setting consumes much less current while maintaining higher brightness level than CCFL lamp. The life of LED will last much longer, typically 10 times longer than CCFL.
UB* High Default Low UL**
1,2(R9) 1 2,3 2,6 2
LCD Controller Specifications:
  • Native resolution: 800X600
  • Upscale resolution up to: 1920×1200
  • 15 Pin D-Sub VGA and DVI Input
  • OSD: Chinese, English, French, Italian, German, Korean. Russian & Spanish
  • Key Functions: On/Off, Menu, Auto, Left & Right
  • Power Source: 12V DC, 3A
  • Compact Size: 55mmX110mm
  • Auto Power On
LED Screen Characteristics:
Item Unit Specifications
Screen Size inch] 10.4
Native Resolution 800 X 600
Active Area [mm] 211.2(H) X 158.4(V)
Outline dimension [mm] 243.0(W) X 181.6(H) x 12.2(D)
Bolt Hole Dimension [mm] 132.6  X 166.6
Input Voltage VDD [Volt] 3.3V typ.
Screen Wire Harness   DF14-20P-1LVDS
Electrical Interface    LVDS (6bit/8bit)
White Luminance [cd/m2] 1600 (UB*, LED Backlight)
Contrast Ratio   1:1200
Response time,  Rising msec 6 typ.
Response time,  Failling msec 19 typ
Viewing Angle - Horizontal degree 80 typ
Viewing Angle - Vertical degree 70 typ
Price: $329.99

Brightness Adjustment Kit
If you need to constantly adjusting brightness level between day and night time. By adding a precision 10k potentiometer and a 7805 5V regulator on MS456UB, you can adjust the brightness all the way from sunlight readable to a complete dim. The lock feature on adjustment knob allows you to lock it on any brightness level. Note: The length of wire is about 6” long
Price: 79.99

Solder 7805 on Q6 location
Solder Orange wire on +5V
Solder Green wire on ADJ
Solder Yellow wire on GND
Note: If you purchase MS104R43LEDX2SKD1600 and Brightness Adjustment kit at the same time, we will installed it before we ship.

MS104R43NECLEDX1 is a direct replacement for 10.4" NEC Indistrial LCD screen more detail

UB Series LED Backlight
UB series are the direct replacement for Industrial LCD screens that were originally equipped with 2, 4 and 6 CCFL backlight lamps.
XB Sereis LED Backlight
XB Series is designed for smaller industrial LCD panels where space is limited by its original CCFL backlight assembly. In other word, UB series LED strip cannot be mounting on these panels.
Touch Screen Inverter
These are brand new substitute backlight inverter module for Point-of-Sale screen, ATM and other type of touch screen.
LCD Controller
These LCD Controller kits are designed to be easily integrated into the LCD screens that they are commonly used in kiosks, POS, avionics, Vending machine, Digital Signage and all other applications.
LCD Screen Looking for an industrial LCD screen?

Open Frame Display
Direct Drop in Replacement LCD display
Touch Screen
New Resistor and Surface Acustic touch screen
SKD kits come with Sunlight Readable LCD screen and LCD controller kit
LVDS Splitter
One LCD controller can driver two LCD screens and both LCD screens will display the same exact contents
Copyright © 1996-2018 MoniServ, Inc. Home  Terms  Privacy  Contact Us   Online Store  Blog