Skip Navigation Links Blog | My Account
Skip Navigation Links.
Follow us
HyperLink HyperLink HyperLink


10.4" MS104R43NECLEDX1 - Sunlight Readable

General Description:
MS104R43NECLEDX1 is a direct replacement for NL6448AC33-18, NL6448AC33-24, NL6448AC33-27, NL6448AC33-29, NL6448BC33-31, NL6448BC33-44, NL6448BC33-46, NL6448BC33-50E, NL6448BC33-53, NL6448BC33-54 and NL6448BC33-59.
MS104R43NECLEDX1 has upgraded to UB54 series LED backlight kit. With build-in dip switch on MS456UB, it can be configure to sunlight readable model ( UB*), Luminance of white could reach as high as 1000 nits and Luminance contrast ratio could reach as high as 1:1000. Or it can be configure to power saving mode (UL**) and LED will last forever. All you need to do it mounting MS456UB on the existing inverter’s location and apply VIN (Red wire, typically 12V DC) and GND (Black) to MS456UB (Step by Step instruction is included). It is easy to install. Anyone can do it!
Price: $299.99

Display Characteristics:
Item Unit Sepcifications
Screen Diagonal inch] 10.4
Outline dimension [mm] 234.0(W)X185.1(H)X10.5(D)
Active Area [mm] 211.2(H) x 158.4(V)
Pixels H x V   640(R, G,B x3) X 480
Pixel Arrangement   R.G.B. Vertical Stripe
Display Mode   TN, Normally White
Input Voltage VDD [Volt] 3.3 typ.
Surface treatment   Anti-glare,hard coating 3H
Electrical Interface   TTL
Support Color   16.2M/262K colors
White Luminance [cd/m2] 1000 (LED Backlight)
Contrast Ratio 1:1000
Dip Switch Configuration for MS456UB Driver
Caution: Please power down before change settings
Caution: Please power down before change settings
UB* High Default Low UL**
5,8 6,8 3,4 3,6 3
*Ultra Bright, this setting may cause shorter life of LED on some LCD screens due to the heat, especially those LCD screens that have the plastic frame instead of Aluminum or metal frame. However, if you prefer to use this setting, we would recommend that you add an additional aluminum heaksink.
** Ultra Low, this setting consumes much less current while maintaining higher brightness level than CCFL lamp. The life of LED will last much longer, typically 10 times longer than CCFL.

How to connect MS456UB to the existing inverter wire harness
The easiest way would be when JP2 is shorted. Just simply apply VIN (Red wire, typically 12V DC) and GND (Black) to MS456UB.
Note: MS456UB can also accept 24V DC input. Please let us know at the checkout if you have a 24V DC supply.
However, in most of case, you do need to connect “ENA” to turn LED backlight On/Off because 12V DC is always present at VIN, even when unit has powered off.
Need help to identify inverter's pin assignment? Please click here
CCFL vs UB LED Backlight Kit - See the Difference!
Please click here for more details

MS104R43NECLEDX1 is a direct replacement for 10.4" NEC Indistrial LCD screen more detail

UB Series LED Backlight
UB series are the direct replacement for Industrial LCD screens that were originally equipped with 2, 4 and 6 CCFL backlight lamps.
XB Sereis LED Backlight
XB Series is designed for smaller industrial LCD panels where space is limited by its original CCFL backlight assembly. In other word, UB series LED strip cannot be mounting on these panels.
Touch Screen Inverter
These are brand new substitute backlight inverter module for Point-of-Sale screen, ATM and other type of touch screen.
LCD Controller
These LCD Controller kits are designed to be easily integrated into the LCD screens that they are commonly used in kiosks, POS, avionics, Vending machine, Digital Signage and all other applications.
LCD Screen Looking for an industrial LCD screen?

Open Frame Display
Direct Drop in Replacement LCD display
Touch Screen
New Resistor and Surface Acustic touch screen
SKD kits come with Sunlight Readable LCD screen and LCD controller kit
LVDS Splitter
One LCD controller can driver two LCD screens and both LCD screens will display the same exact contents
Copyright © 1996-2017 MoniServ, Inc. Home  Terms  Privacy  Contact Us   Online Store  Blog