17.0" Open Frame - Sunlight Readable

This embedded 17” open frame LCD monitor had upgraded to UB70 series LED backlight kit. With build-in dip switch on MS456UB LED driver, it can be configured to sunlight readable mode (UB*). Or it can be configured to power saving mode (UL**) and LED backlight will last forever. It is designed to be easily integrated into (or Replacing your existing defective LCD monitor) kiosks, POS, avionics, Vending machine, gaming and all other applications. It is easy to install. Anyone can do it! Price: $359.99 Part Number: MS170R43LEDX2-V2 Add-On Touchscreen is available at the checkout. Additional $109.99. Free installation Note: We had ensured all refurbished LCD screens meet its original specification before we upgraded to our Sunlight Readable LED backlight kit.

Optional You do have an option to choose DVI, VGA and HDMI controller at the checkout page(MS489LC). It also has 2.2W Audio amplifier on board, too.

Dip Switch Setting: We recommend that you try all these settings to see the difference. The thumb of the rules would be lower is better (LED will last longer). To change the setting, please power down the LCD monitor, and then make the change. * Ultra Bright, this setting may cause shorter life of LED on some LCD screens due to the heat, especially those LCD screens that have the plastic frame instead of Aluminum or metal frame. However, if you prefer to use this setting, we would recommend that you add an additional aluminum heat sink. ** Ultra Low, this setting consumes much less current while maintaining higher brightness level than CCFL lamp. The life of LED will last much longer, typically 10 times longer than CCFL.

UB* High Default Low UL** 2,7,8 2,5,7 2,6,7 1,7 (R9) 4,7

Specifications: Native resolution: 1280X1024 Up resolution: 1920×1200 DVI and VGA input 1200:1 Contrast Ratio / 1500nit(s) Brightness 150/125degree(s) Viewing Angle (H/V) / 0.297mm Dot Pitch OSD: Chinese, English, French, Italian, German, Korean. Russian & Spanish Key Functions: Select/Exit, Menu, Auto, Left & Right Power Source: 96-246 AC Input (12V DC Output. AC-DC Adapter is included) 90 Days Warranty

LED Screen Characteristics:

Item Unit Sepcifications Screen Diagonal inch] 17 Outline dimension [mm] 358.5(W) x 296.5(H) x 17.0(D) Active Area [mm] 337.92(H) x 270.33(V) Pixels H x V   1280(R, G,B x3) x 1024 Pixel Arrangement   R.G.B. Vertical Stripe Display Mode   TN, Normally White Input Voltage VDD [Volt] 5.0 typ. Surface treatment   Anti-glare,hard coating 3H Electrical Interface   Dual channel LVDS Support Color   16.7M colors (RGB 6-bit +Hi-FRC data) White Luminance [cd/m2] 1500 (UB*, LED Backlight) Contrast Ratio   1:1200 Response time, Rising msec 2 typ. Response time, Failling msec 6 typ Viewing Angle - Horizintal degree 70 typ Viewing Angle - Vertical degree 80 typ

Note: We had ensured all refurbished LCD screens meet its original specification before we upgraded to our Sunlight Readable LED backlight kit. Dimension: Outer Dimension: 397mm (W) X295mm (H) X40mm (D) Active Area Dimension: 342mm (W) X275mm (H) Dimensions in PDF

Price: $359.99

Add-On Touchscreen is available at the checkout. Additional $109.99. Free installation

Brightness Adjustment Kit If you need to constantly adjusting brightness level between day and night time. By adding a precision 10k potentiometer and a 7805 5V regulator on MS456UB, you can adjust the brightness all the way from sunlight readable to a complete dim. The lock feature on adjustment knob allows you to lock it on any brightness level. Note: The length of wire is about 6” long Price: 79.99

Instruction Solder 7805 on Q6 location Solder Orange wire on +5V Solder Green wire on ADJ Solder Yellow wire on GND Note: If you purchase MS104R43LEDX2SKD1600 and Brightness Adjustment kit at the same time, we will installed it before we ship.