Skip Navigation Links Blog | My Account
HyperLink
Skip Navigation Links.
Follow us
HyperLink HyperLink HyperLink


HyperLink

22" SKD kit - Sunlight Readable up to 1000 nits

This 22” (ratio: 16:10 Wide screen) SKD kit had upgraded to UB60 series LED backlight kit. With build-in dip switch on MS456UB LED driver, it can be configured to sunlight readable mode (UB*). Or it can be configured to power saving mode (UL**) and LED backlight will last forever. It is designed to be easily integrated into (or Replacing your existing defective LCD monitor) kiosks, POS, avionics, Vending machine, gaming and all other applications. It is easy to install. Anyone can do it!
Price: $495.99
Part Number: MS220W1610LEDSKD

HyperLink
Quantity discount is available at the checkout.
Note: We had ensured all refurbished LCD screens meet its original specification before we upgraded to our Sunlight Readable LED backlight kit.
Optional
You do have an option to choose DVI, VGA and HDMI controller at the checkout page(MS489LC). The dimension of MS489LC is 140mmX58mm and it also has 2.2W Audio amplifier on board, too.
Dip Switch Setting:
We recommend that you try all these setting to see the difference. The thumb of the rules would be lower is better(LED will last longer). To change the setting, please power down the LCD monitor, and then make the change.
* Ultra Bright, this setting may cause shorter life of LED on some LCD screens due to the heat, especially those LCD screens that have the plastic frame instead of Aluminum or metal frame. However, if you prefer to use this setting, we would recommend that you add an additional aluminum heat sink.
** Ultra Low, this setting consumes much less current while maintaining higher brightness level than CCFL lamp. The life of LED will last much longer, typically 10 times longer than CCFL.
UB* High Default Low UL**
1,2,7 1,7 2,7 7,8 4,7
LCD Controller Specifications:
  • Native resolution: 1680x1050
  • Up resolution: 1920×1200
  • DVI and VGA input
  • 1000:1 Contrast Ratio / 1000nit(s) Brightness
  • 150/125degree(s) Viewing Angle (H/V) / 0.297mm Dot Pitch
  • OSD: Chinese, English, French, Italian, German, Korean. Russian & Spanish
  • Key Functions: Select/Exit, Menu, Auto, Left & Right
  • Power Source: 96-246 AC Input (12V DC Output. AC-DC Adapter is NOT included)
  • 90 Days Warranty
AC-DC Adapter is NOT included. But it can be purchase at the checkout page ($35)
LED Screen Characteristics:
Item Unit Sepcifications
Screen Diagonal inch] 22
Outline dimension [mm] 493.7(W) x320.1(H) x 16.5(D)
Active Area [mm] 473.76(H) x 296.1(V)
Pixels H x V   1680(R, G,B x3) x 1050
Pixel Arrangement   R.G.B. Vertical Stripe
Display Mode   TN, Normally White
Input Voltage VDD [Volt] 5.0 typ.
Surface treatment   Anti-glare,hard coating 3H
Electrical Interface   Dual channel LVDS
Support Color   16.7M colors (RGB 6-bit +Hi-FRC data)
White Luminance [cd/m2] 1000 (UB*, LED Backlight)
Contrast Ratio   1:1000
Response time,
Rising
msec 1.5 typ.
Response time,
Failling
msec 3.5 typ
Viewing Angle - Horizintal degree 80 typ
Viewing Angle - Vertical degree 80 typ
Price: $495.99
HyperLink
Quantity discount is available at the checkout.
Add-On Touchscreen is available at the checkout.
Additional $119.99 with Free installation
Note: We had ensured all refurbished LCD screens meet its original specification before we upgraded to our Sunlight Readable LED backlight kit.

Brightness Adjustment Kit
If you need to constantly adjusting brightness level between day and night time. By adding a precision 10k potentiometer and a 7805 5V regulator on MS456UB, you can adjust the brightness all the way from sunlight readable to a complete dim. The lock feature on adjustment knob allows you to lock it on any brightness level. Note: The length of wire is about 6” long
Price: 79.99
HyperLink

Instruction
Solder 7805 on Q6 location
Solder Orange wire on +5V
Solder Green wire on ADJ
Solder Yellow wire on GND
Note: If you purchase MS104R43LEDX2SKD1600 and Brightness Adjustment kit at the same time, we will installed it before we ship.

MS104R43NECLEDX1 is a direct replacement for 10.4" NEC Indistrial LCD screen more detail
HyperLink

UB Series LED Backlight
UB series are the direct replacement for Industrial LCD screens that were originally equipped with 2, 4 and 6 CCFL backlight lamps.
HyperLink  
XB Sereis LED Backlight
XB Series is designed for smaller industrial LCD panels where space is limited by its original CCFL backlight assembly. In other word, UB series LED strip cannot be mounting on these panels.
HyperLink  
Touch Screen Inverter
These are brand new substitute backlight inverter module for Point-of-Sale screen, ATM and other type of touch screen.
HyperLink  
LCD Controller
These LCD Controller kits are designed to be easily integrated into the LCD screens that they are commonly used in kiosks, POS, avionics, Vending machine, Digital Signage and all other applications.
HyperLink
LCD Screen Looking for an industrial LCD screen?
 HyperLink

Open Frame Display
Direct Drop in Replacement LCD display
HyperLink
Touch Screen
New Resistor and Surface Acustic touch screen
HyperLink
SKD kits come with Sunlight Readable LCD screen and LCD controller kit
HyperLink
LVDS Splitter
One LCD controller can driver two LCD screens and both LCD screens will display the same exact contents
HyperLink
   
Copyright © 1996-2017 MoniServ, Inc. Home  Terms  Privacy  Contact Us   Online Store  Blog