Skip Navigation Links Blog | My Account
HyperLink
Skip Navigation Links.
Follow us
HyperLink HyperLink HyperLink


HyperLink

CCFL Backlight Lamp - Soldering is required

Defective CCFL backlight may has the following symptom:
  • Screen flashes on red/pink and goes off.
  • Picture stays on in red and slowly be come normal.
  • Picture flickering with dim display.
  • Picture flickering on and off.
 All these symptoms indicate that the LCD backlight lamp (CCFL Lamp)
has reached the end of the life and all you need to do is replacing the CCFL lamp.


Buy Now

We also have pre-installed wire harness backlight lamp available for Laptop screen.
Please click here for detail Please click here for detail
Part NumberMSLTOSHIBA104R
Price$9.99
Strike Voltage1030
Working Voltage592
Watts3
Intensity42000
DescriptionThis is our newest generation of CCFL; it doesn't just produce a higher brightness and contrast, it is also made by precise precision color match. After the backlight replacement, the image should look brighter and clearer. Note: Replacing with a poor quality CCFL may cause a greenish, bluish or reddish hue after the backlight lamp replacement.

We Recommend: RepairKit2:for Laptop Screen Repair
This repair kit comes with 6” of Conductive Aluminum Foil, 12” of Hi Temp Tape, two silicon end caps, two heat shrinking tubes and 6” of wire solder. This repair kit ($7.5) is a MUST have kit if you are replacing CCFL Lamps on your Laptop/ Notebook Screen. This aluminum foil conductive tape is used to meet a variety of EMI/RFI shielding applications.
We do offer CCFL Backlight Replacement service. Please click here for more details.

This CCFL Backlight lamp had been confirmed by our technicians which is compatible with
the following brand, models and specify screen size:
Buy Now

Can't find your Model Listed? Please double check your Laptop screen size by measure it diagonally
and follow our simply procedure to locate a CCFL backlight Lamp click here.

TST01
Testing 4 wires, 5 wires and 8 wires resistive touch screens
HyperLink
LST05-V3
LCD screen tester (for testing eDP/embedded Display Port interface). With its built-in Color bar generator, it can test resolution from 1280X800 to 3840X2160.
HyperLink  
IT03
Testing LED Strip without Disassembly. IT03 can test all LED strips from a smaller industrial screen and up to 70 inch TV screen.
HyperLink
Sunlight Readable LCD
Simply swap out your defective LCD screen, you now have a sunlight readable Monitor.
HyperLink
UB Series LED Kit
UB series are the direct replacement for Industrial LCD screens that were originally equipped with 1, 2, 4 and 6 CCFL backlight lamps.
HyperLink  
SB Sereis LED Kit
These super bright LED upgrade kits are designed for LCD screens that original equipped with its manufacturer’s LED strip
HyperLink  
Touch Screen Inverter
These are brand new substitute backlight inverter module for Point-of-Sale screen, ATM and other type of touch screen.
HyperLink  
LCD Controller
These LCD Controller kits are designed to be easily integrated into the LCD screens that they are commonly used in kiosks, POS, avionics, Vending machine, Digital Signage and all other applications.
HyperLink
LCD Screen
Huge selections of industrial LCD screens
 HyperLink
Open Frame Display
Direct Drop in Replacement LCD display
HyperLink
Touch Screen
Resistive and capacitive touch screens
HyperLink
LCD Kit
These LCD kits included LCD controller, LED screen, Push button key and screen wire harness.
HyperLink
LVDS Splitter
One LCD controller can driver two LCD screens and both LCD screens will display the same exact contents
HyperLink
   
Copyright © 1996-2019 MoniServ, Inc. Home  Terms  Privacy  Contact Us   Online Store  Blog