Skip Navigation Links My Account | Help
HyperLink
Skip Navigation Links.
Follow us
HyperLink HyperLink HyperLink


HyperLink

XB LED Backlight Kit for Laptop Screen:

Much easier to install compare with CCFL replacement, anyone can do it! No technical skill requires. No Soldering skill requires!

To find a replacement LED backlight kit for your Laptop Screen, please click here

The XB series is designed 9 LEDs in a string and total 6 Strings. XB series LED backlight kit comes with a custom Converter. By Upgrading to XB Series, The brightness level will be increasing about 100% compare with CCFL Lamp.

These LED backlight kits are compatible with following screen sizes:
14.1” WXGA, 14.1” WXGA+, 14.1” WSXGA
15” XGA, 15” SXGA
15.4’ WXGA, 15.4” WXGA+, 15.4”WSXGA, 15.4” WUXGA

Note: Due to the limitation of some manufacture's Inverter (Input Connector). These LED kits are ONLY available for selected Brand and Model.  Please click here for more details

XB Series LED Backlight kit comes with a custom build Converter and one LED Strip

3 easy steps to upgrading from CCFL to LED Backlight:
Step1:
Disassembly Laptop screen (Photo shown below). It is the exact same procedure as replacing CCFL backlight Lamp. Set aside CCFL Reflector assembly (No longer need it).
Remove double side tape cover on LED Strip
Before Install:
Please test LED strip before install. Connect XB LED converter to your Laptop inverter wire Harness, make sure all LED light up.
Note: XB LED strip had connected to LED Converter and it is wrapping in yellow high temperature tape. Please do not remove it or do not disconnect ribbon flat cable
Before Remove Double side Tape cover:
Please place a XB LED Strip at the edge of Screen (As shown on photo below), be sure LED strip is align at the edge of plastic frame
Remove Double Side Tape covers
Step2:
Tape XB LED Strip at the bottom edge of Laptop Screen, where it use to mount CCFL Backlight Assembly as photo shown below.
Step3:
Re-assembly Laptop screen (Photo shown below). It is the exact same procedure as replacing CCFL backlight Lamp. Connect LED Converter to Laptop Inverter wire harness.
 
Connecting LED converter to Laptop computer:
XB Series LED converter (MS406LEDC) is designed to be direct replacement of the Laptop inverter. The input pin assignments are compatible with most of Inverter. However, in some cases, you cannot find your model listed. Then you need to purchase a universal XB Kit. This kit comes with a 6 pin wire harness. Please click here for Universale Kit  (Or email us a picture of the inverter to techsupport@lcdparts.net)
To find a replacement LED backlight kit for your Laptop Screen, please click here




LST01
No more guess works!
LST01 is a custom build tester for Laptop screen repair; it can help you to isolate the problem between CCFL Backlight Lamp and Inverter in seconds.
Save Time! Save money!
HyperLink
LST04 - No setup time
Small and compact, easy to use, with build-in Color bar generator, you can test LCD screen size up to 60”
HyperLink
IT01
IT01 is design to test multiple backlight lamps inverter; it is capable to test any type of inverter up to 6 lamps at the time!
HyperLink
IT02
Stand alone Inverter tester!
The advantage of this custom build tester is that, you can apply any input voltage through DC Jack to test inverter from Laptop to LCD TV inverter.
HyperLink
UB Series LED Backlight
UB series are the direct replacement for Industrial LCD screens that were originally equipped with dual or 4 CCFL backlight lamps.
HyperLink
LCD Controller
These LCD Controller kits are designed to be easily integrated into the LCD screens that they are commonly used in kiosks, POS, avionics, Vending machine, Digital Signage and all other applications.
HyperLink
45 Piece Screw Driver Set
HyperLink
Copyright © 1996-2014 MoniServ, Inc. Home  Terms  Privacy  Contact Us   Online Store